Akai GX 650D
|
Track format |
4 track |
|
Reel Size, max. |
26,5 |
|
Tape Speed, cm/s |
38-19-9,5 |
|
Frequency, Hz (19 cm/s) |
30-26000 |
|
Wow & Flutter, % WRMS |
0,055 |
|
Signal to Noise ratio, -dB |
58 |
|
Heads |
3 |
|
Motors |
3 |
|
Weight, kg |
26,2 |
|
Dimensions (Wx H) |
442x524 |
|
Year |
1975 |
Track System: 4 track, 2 channel stereo/monaural system
Reel Capacity: Up to 10 reel
Tape Speed: 15,7 1/2 and 3,3/4 ips (±0.5%)
Wow/Flutter:
Less than 0.04% RMS at 15 ips
Less than 0.055% RMS at 7,1/2 ips
Less than 0.07% RMS at 3,3/4 ips
Frequency Response:
30 to 20,000 Hz ± 3 dB at 15 ips using Akai LN-150 tape
30 to 26,000 Hz ± 3 dB at 7, 1/2 ips using Akai LN-150 tape
30 to 20,000 Hz ± 3 dB at 3, 3/4 ips using Akai LN-150 tape
Distortion:
Less than 0.4% at 15 and 7,1/2 ips (1,000 Hz "0" VU)
Less than 0.9% at 3,3/4 ips (1,000 Hz "0" VU)
Signal-to-Noise Ratio: Better than 58 dB (with peak recording level of + 6 VU)
Erase Ratio: Better than 70 dB
Bias Frequency: 150 kHz
Heads:
1 GX Playback Head
1 GX Recording Head
1 Erase Head
Motors:
1 AC Servo Motor for capstan drive
2 Eddy Current Motors for reel drive
Fast Foward and Rewind Time: 120 sec. using a 2,400 ft. tape
Output Jacks:
Line (2): 0.775V ("0" VU)/ required load impedance: More than 20 k ohms
Phone (1): 30 mV/8 ohms
Input Jacks:
Microphone (2): 0.3 mV/ required microphone impedance: 600 ohms
Line (2): 80 mV/100 k ohms
Semi-Conductors: Transistors 72; Diodes 61; 1C 1
Power Requirements: 220V, 50 Hz
Dimensions: 524x442x258 mm