Akai GXC-706 D
Track System: 4 track 2 channel stereo system
Tape: Philips type cassette
Tape Speed: 1-7/8 ips
Wow & Flutter: Less than 0.055% WRMS, 0.17% (
Frequency Response:
35 to 13,000 Hz ±3 dB using LN tape
35 to 14,000 Hz ±3 dB using LH tape
35 to 15,000 Hz ±3 dB using C1O2 (SA) tape
35 to 15,000 Hz ±3 dB using FeCr tape
Distortion (1,000 Hz 0 VU):
Less than 1.3% using LN tape
Less than 1.3% using LH tape
Less than 1.5% using CrO2 (SA) tape
Less than 1.5% using FeCr tape
Signal to Noise Ratio:
Better than 54 dB using LN tape
Better than 54 dB using LH tape
Better than 56 dB using CrO2 (SA) tape
Better than 56 dB using FeCr tape
(with peak recording level of +3 VU); Dolby NR ON: Improves up to 10 dB above 5 kHz
Erase Ratio: Better than 70 dB
Bias Frequency: 85 kHz
Heads:
1 GX recording/playback head
1 Erase head
Motor: Electronically speed controlled D.C. motor
Fast Forward and Rewind Time: 120 sec. using a C-60 cassette tape
Output Jacks:
Line (2): 410 mV (0VU), required load impedance more than 20 kohms
Phone (1): 100 mV/8 ohms
Input Jacks:
Microphone 1: 0.25 mV (Input impedance 5.0 kohms),
Microphone 2: required microphone impedance 600 ohms
Line (2): 70 mV (Input impedance 100 kohms)
DIN Jack:
Input: 0.25 mV (Input impedance 5.0 kohms)
Output: 410 mV. Required load impedance more than 20 kohms
Semi-conductors: Transistors 16; Diodes 21; Fet`s 2; Ic`s 3
Power Requirements: 220V/50 Hz
Dimensions: 440x150x290 mm
Weight: 6.5 kg