Nakamichi LX-3
Track Configuration: 4 tracks 2 channels stereo
Heads: record/playback head x 1, erase head x 1
Motors (Tape Transport)
DC servo motor (capstan drive) x1
DC motor (reel drive) x1
Power Source: 220 or 240V AC; 50/60Hz
Power Consumption: 33 W max.
Tape Speed: 4.8 cm/sec. ± 0.5%
Wow-and-Flutter:
Less than ±0.11 % Wtd peak
Less than 0.06% Wtd rms
Frequency Response: 20 Hz - 20,000 Hz (recording level -20 dB, ZX, SX, EX 0 tape)
Signal-to-Noise Ratio
Dolby C-Type NR on <70μs, ZX tape>
Better than 68 dB (400 Hz, 3% THD, IHF A-Wtd rms)
Dolby B-Type NR on <70μs, ZX tape>
Better than 62 dB (400 Hz, 3% THD, IHF A-Wtd rms)
Total Harmonic Distortion: Less than 1.0% (400 Hz, 0 dB, ZX, EX 0 tape)
Less than 1.2% (400 Hz, 0 dB, SX tape)
Erasure: Better than 60 dB (100 Hz, 0 dB)
Separation: Better than 36 dB (1 kHz, 0 dB)
Crosstalk: Better than 60 dB (1 kHz, 0 dB)
Bias Frequency: 105 kHz
Input (Line): 50 mV, 70 kΩ
Output (Line): 1V (400 Hz, 0 dB, output level control at max.) 2.2 kΩ
Headphones: 12 mW (400 Hz, 0 dB, output level control at max.) 8Ω load
Dimensions: 450x135x307 mm
Weight: 8.5 kg