Kenwood Super Eleven
Power Output
125 watts per channel minimum RMS, both channel driven at 8 ohms
from 20 Hz to 20,000 Hz with no more than 0.02% total harmonic distortion
Both Channels Driven
into 8 ohms at 1.000 Hz: 130W + 130W
into 4 ohms at 1.000 Hz: 140W + 140W
Dynamic Power Output at 4 ohms: 320W
Total Harmonic Distortion (20 Hz to 20.000 Hz from Tape)
rated power into 8 ohms: 0.02%
1 watt power into 8 ohms: 0.008%
Intermoduration Distortion (60 Hz: 7 kHz 4:1 SMPTE)
rated power into 8 ohms: 0.01 %
1 watt power into 8 ohms: 0.008%
Slew Rate: ±140V/μsec
Rise Time: 0.95 μsec
Damping Factor (8 ohms at 1 kHz): 60
Input Sensitivity/Impedance
Phono: 2.5 mV/50k ohms
Tape. Aux: 200 mV/50k ohms
Mic: 3.0 mV/50k ohms
Signal to Noise Ratio (A weighted)
Phono: 80 dB for 2.5 mV input; 86 dB for 5.0 mV input
Tape. Aux: 105 dB for 200 mV input
Mic: 70 dB for 3.0 mV input
Maximum Phono Input Level at 1.000 Hz: 180 mV (rms). THD 0.02%
Frequency Response Phono R1AA
Standard Curve: 20 Hz to 20.000 Hz ±0.3 dB
Tape. Aux: DC Hz to 230,000 Hz -3 dB
FM Tuner Section
Usable Sensitivity: 10.3 dBf (1.8 μV)
50 dB Quieting Sensitivity
Mono: 14.7 dBf (3.0 μV)
Stereo: 37.2 dBf (40 μV)
Signal to Noise Ratio at 65 dBf
Mono: 78 dB
Stereo: 73 dB
Total Harmonic Distortion at 1.000 Hz
Mono: 0.1%
Stereo: 0.15%
Frequency Response: 20 Hz to 15.000 Hz + 0.5 dB, -1.0 dB
Capture Ratio: 1.0 dB
Image Rejection Ratio: 60 dB
Spurious Response Ratio: 80 dB
IF Response Ratio: 80 dB
Alternate Channel Selectivity: 75 dB at 400 kHz
AM Suppression Ratio: 65 dB
Stereo Separation Ratio
at
at 100 Hz to
Subcarrier Product Ratio: 46 dB
Antenna Impedance: 300 ohms balanced and
75 ohms unbalanced FM Frequency Range: 88 MHz to 108 MHz
AM Tuner Section
Usable Sensitivity: 15 μV (350 μM/m)
Signal to Noise Ratio: 50 dB
Image Rejection: 50 dB
Selectivity: 30 dB
General
Power Consumption: 710 wans at full power
80 watts at no signal
AC Outlets: Switched 2; Unswitched 1
Dimensions: 624x206x460 mm
Weight: 24.5 kg