Pioneer SA-706

Circuitry:

1-st stage current-mirror loaded differential amplifier,

constant current loaded all-stage direct-coupled OCL.

Continuous Power Output: 2x60 watts (8 om) with no more than 0.04% total harmonic distortion.

T.H.D. (20Hz to 20,000Hz, from AUX)

Output Speaker: A, B, A+B

Damping Factor (20Hz-20,000Hz, 8 ohms): 40

Input (Sensitivity/Impedance):

PHONO: 2.5mV/ 50 kilohms

TUNER: 150mV/50 kilohms

AUX: 150mV/50 kilohms

TAPE PLAY 1: 150mV/50 kilohms

TAPE PLAY 2: 150mV/50 kilohms

TAPE PLAY 2 (DIN connector): 150mV/50 kilohms

Phono Overload Level (T.H.D. 0.01%, 1 kHz)

PHONO: 180mV

Output (Level/Impedance)

TAPE REC1: 150mV

TAPE REC 2: 150mV

TAPE REC 2 (DIN connector): 30mV/80 kilohms

Frequency Response:

PHONO (RIAA Equalization): 20 Hz to 20,000Hz ± 0.2dB

TUNER, AUX, TAPE PLAY: 20 Hz to 40,000Hz ± 2dB

Tone Control:

BASS: +12dB, -10dB (100Hz)

TREBLE: +10dB, -10dB (10 kHz)

Loudness Contour (Volume control set at -40dB position): +6dB (100Hz), +3dB (10 kHz)

Hum and Noise (IHF, short-circuited, A network)

PHONO: 86dB (Phono interference filter switch off) TUNER, AUX, TAPE PLAY: 95dB

Hum and Noise (DIN, continuous power/50mW)

PHONO: 70dB/58dB

AUX: 85dB/60dB

Semiconductors IC: 1

Transistors: 31

Diodes: 29

Power Requirements: AC 110/120/220/240V (switchable), 50/60Hz

Power Consumption: 520W (max.)

Dimensions: 420x147x327 mm

Weight: 11.7 kg